Patient MONITORING SYSTEM (AT89C2051 + TX/RX) In spite of the improvement of communication link and despite all progress in advanced communication technologies, there are still very few functioning commercial wireless monitoring systems, which are most off-line, and there are still a number of issues to deal with. Therefore, there is a strong need for investigating the possibility of design and implementation of an interactive real-time wireless communication system. In our project, a generic real-time wireless communication system was designed and developed for short and long term remote patient-monitoring applying wireless protocol. The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air. At the receiving end a receiver is used to receive the data and it is decoded and fed to Microcontroller, which is then displayed over the LCD display. If there is a dangerous change in patient's status an alarm is also sounded.
Subscribe to:
Post Comments (Atom)
-
The number of Internet subscribers in the country grew 5.4 per cent to 251.59 million in January-March 2014 quarter, the Parliament was i...
-
Introduction To LED Panel Meter with LED Drivers The Intersil ICL7107 is a low power, 31/2 digit A/D converters that is used to drive LED ...
-
This week the folks at ASUS have had a bit of a leak in their pipes with both product images and details surrounding their next Android...
No comments:
Post a Comment